Because there are so many distributors of pre-made needles on
the market today, the number of studios that re-use the needle
bars and make their own needles is very slim. If you are an artist
who makes his own needles, you should always ensure that
you follow proper sterilization and sanitation technique when
re-using the needle bars.
Related Articles
-
Discuss Autoclave Scenario
Here is an example scenario: Joe conducted a weekly spore test on his primary autoclave on 01 January. Joe...
-
How do I get the Best Frame?
Like everything else in the world of tattoo, there is no such thing as a “best frame”. You will...
-
Solid color and Layered color
There are two basic types of color tattoo styles, solid and layered. Each time you start a color piece...
-
Tattoo Needle Configurations
This is some information from CR Jordan's new DVD Training series for Tattoo Artists. The following is a rough...
-
Basic Fundamentals of Modern Tattoo
Basic Fundamentals of Modern Tattoo is the tattoo apprentice basics guide for tattoo artists around the world. This book...
-
Cap size does matter!
Small capacitors can make your tattoo machine run faster. Not small size, but small rating in the micro farads....
-
Spring Gauging
There are two springs on the standard tattoo machine, the front and the rear. In the standard spring setup...
-
Hot Zone
Hot zone: Once the needle breaks skin the hot zone is established. The hot zone consists of the client,...
0 Comments
